收藏本站
B.4.1 Adding Other Components
There are pads for 28-pin TSSOP devices, 16-pin SOIC devices, and 6-pin SOT devices
that can be used for surface-mount prototyping with these devices. There are also pads that
can be used for SMT resistors and capacitors in an 0805 SMT package. Each component
has every one of its pin pads connected to a hole in which a 30 AWG wire can be soldered
(standard wire wrap wire can be soldered in for point-to-point wiring on the Prototyping
Board). Because the traces are very thin, carefully determine which set of holes is con-
nected to which surface-mount pad.
B.4.2 Measuring Current Draw
The Prototyping Board has a current-measurement feature available at header locations
JP1 and JP2 for the +5 V and +3.3 V supplies respectively. To measure current, you will
have to cut the trace on the bottom side of the Prototyping Board corresponding to the
power supply or power supplies whose current draw you will be measuring. Header loca-
tions JP1 and JP2 are shown in Figure B-5. Then install a 1 × 2 header strip from the
Development Kit on the top side of the Prototyping Board at the header location(s) whose
trace(s) you cut. The header strip(s) will allow you to use an ammeter across their pins to
measure the current drawn from that supply. Once you are done measuring the current,
place a jumper across the header pins to resume normal operation.
C2
C1
U1
Bottom Side
JP1
C5
L1
C6
JP2
Cut traces
JP1
JP2
CURRENT
MEASUREMENT
JP1 (+5 V)
or
JP2 (+3.3 V)
0
A
Figure B-5. Prototyping Board Current-Measurement Option
NOTE: Once you have cut the trace below header location JP1 or JP2, you must either be
using the ammeter or have a jumper in place in order for power to be delivered to the
Prototyping Board.
User ’s Manual
91
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
101-8430-09-203 LED BASE SUBMINI PANEL INDICATOR
103-0537-403 CAP PMI OILTIGHT 1" CLEAR
103-1234-403 CAP LG PANEL IND BLUE OIL TIGHT
103-1336-403 CAP PMI TORPEDO 1" LIGHT YELLOW
103-3101-05-103 LED BASE T-3 1/4 PANEL OIL TIGHT
1032DX5 INDICATOR NEON GREEN PANEL MNT
1033QD5 NEON IND GRN LITE PANEL MNT QC
1034 LAMP INCAND S-8 DBL INDEX VOLT
相关代理商/技术参数
101-1294 功能描述:处理器配件 12VDC POWER SUPPLY REPLACES 101-0686 RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
101-1295 功能描述:处理器配件 RCM5600W Antenna Kit RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
10-112989-1 制造商: 功能描述: 制造商:undefined 功能描述:
10112A WAF 制造商:Intersil Corporation 功能描述:
10112-A-0440-2 制造商:Amatom Electronic Hardware 功能描述:
10112-A-0632-2 制造商:Amatom Electronic Hardware 功能描述:
10112-B-0632-6A 制造商:Amatom Electronic Hardware 功能描述:
10-112-BLANK 制造商:Calrad Electronics 功能描述: